There are different types of industrial battery chargers available in the market. Here is an overview of various types of deep-cycled or traction battery chargers that can be used to electrify your industrial batteries.
Standard 50 Hz chargers
Standard 50 Hz chargers are widely used in applications installed in Airports, Warehouses, Supermarkets and Hospitals. They are of high quality and can charge all types of industrial batteries.
Features of Standard 50 Hz deep-cycled chargers
A� Battery capacities to suit 30-1600Ah
A� Available in all sizes
A� Available in Single or Three Phase
A� Suits Flooded standard batteries
A� Recyclable
A� DC Plugs and cable available
High Frequency Industrial Development Geography Chargers
High Frequency Chargers are new generation battery chargers. Compared to the ordinary battery chargers, they are compact and more efficient. They can be programmed to deliver more precise charge to any battery.
Features of High Frequency Chargers
A� Suitable for ‘on board ‘applications of a vehicle
A� Charges a battery in a very short time
A� Uses less electricity to charge an industrial battery
A� Lower maintenance cost
A� Suitable for Flooded, VRLA, GEL or AGM
A� Comes with air pumps for air agitated batteries
A� Longer battery life through precise charging
In addition to these benefits the programmable nature of High Frequency chargers allows you to keep your industrial batteries fully charged. The charger can be programmed to deliver an equalisation charge and this helps in maintaining batteries that are deeply discharged on a regular basis.
Fronius Chargers
Fronius chargers come with several enhanced features like Intelligent Active Inverter Technology, serviceable modular design, “Plug & Charge” software and accompanying characteristic programming.
Fronius chargers with Intelligent Active Inverter Technology can increase a batteries’ service life by up to 25%.
Features of Fronius Chargers
A� Available in various sizes
A� Compact, lightweight design
A� Based on Active Inverter Technology
A� Available in Single or Three Phase
A� Suitable for Flooded, VRLA, Gel or AGM
A� Recyclable
A� Proof against deep discharge
A� 100% serviceable
Where can you find these battery chargers?
There are many battery suppliers that sell these highly efficient industrial battery chargers. You can find a good supplier in your locality from the internet. Word of mouth referrals are another great way to identify a vendor who provides quality deep cycled chargers. When you are purchasing a charger go for a supplier who sells chargers from various How Long Has The Tech Industry Been Around manufactures. This way you will have the flexibility to choose from a wide range of chargers. There are some suppliers who allow you to rent chargers for a short of longer period of time. Most suppliers will also offer repair and servicing, so you don’t have to worry about looking after and repairing your valuable deep cycled battery chargers.…
Tag: types
Types of Household Furnaces
The furnaces can be divided into four categories -.house hold, industrial, metallurgical, and incinerating. The household furnaces are designed to be installed inside or outside the homes and are mainly used to heat water and keep the homes warm in winter times. Usually, fuels like natural gas, coals, water, and wood are used to run the domestic furnaces.
Gas Furnaces: These days, gas furnaces are the most preferred form of household. These are fueled by natural gas, which can be purchased from a local company. The natural gas is more efficient and more clean burning than most of the other domestic fuels. Generally, gases like liquefied petroleum gas (LPG), biogas, and methane gas are used to fire a gas furnace.
The gases are equipped with an igniter and a thermostat, which senses the room temperature. When the thermostat records a temperature below the programmed temperature, the igniter will turn on and then the furnace will start to burn the gas. Industrial Engineering Book The resultant air will be distributed throughout the house by a duct system. In some gas furnaces, especially in the old ones, the gas is lighted by a pilot light. Most of the newer gas furnaces use an electric spark to ignite the gas.
Oil Furnaces: Many homeowners prefer to use oil furnaces for heating their homes. Oil is the most easily available natural resource whereas the other forms of furnace fuels are not so abundant. However, the oil furnaces are not as efficient as gas furnaces and require more electricity than the gas.
Most oil furnaces have a storage tank from which the oil can be piped into the combustion chamber of the furnace, where it will be atomized. In the oil furnaces, Industrial Development Painting high-voltage electrodes are used to ignite the atomized fuel. The heat is then circulated throughout the house by a forced-air circulating fan.
Wood Furnaces: The wood furnaces use wood pellets or logs to generate heat. Both indoor and outdoor wood furnaces are available in the market. They use either hot water or forced air flow to produce and circulate the heat. Generally, the wood is cheaper than the other furnace fuels and naturally wood furnaces are cost effective than most of the other domestic furnaces. A wood furnace consists of many parts, including a cabinet, sealed firepot, blower, draft fan, thermostat, and a chimney.
All household furnaces, particularly the gas, oil, and wood furnaces, require to be periodically cleaned in order to maintain an efficient heating system. If not maintained properly, these furnaces may emit hazardous fumes. Hence, they should be regularly checked by an experienced professional, at least once in a year. The furnaces that have higher AFUE ratings are more efficient and require much less fuel..
Electric furnaces are also available in the market. The main advantages of electric furnaces are that they are safer than other domestic furnaces and do not produce carbon monoxide or any other hazardous fumes. However, these furnaces are very expensive and it …
The Types Of 3D Printing
3D printing is a pretty fascinating form of manufacturing technology in my opinion; there are many branches of 3D printing such as Stereolithography (SLA), Selective Laser Sintering (SLS), Direct Metal Laser Sintering (DMLS), Fused Deposition Modeling (FDM), Multi-Jet Modeling (MJM), or Ink Jet 3D printing. Each form of additive manufacturing is significant in its own way through its own niches. I’d like to cover some applications of each.
Stereolithography or SLA methods involve ultraviolet beams of light hitting curable resins to result in final parts. These parts play an active role in creating many medical applications. For Industrial Development Geography example, SLA methods are dominant in the 3D printing world for dental applications, hearing aids, and similar implants. SLA 3D printing has been great for creating extremely precise parts.
Direct Metal Laser Sintering (DMLS) stands out in the 3D printing world as “metal 3D printing” for a reason: it is metal 3D printing! Through a layer by layer process of using laser technology to melt powdered metal together, it isn’t difficult to manufacture intricate organic metal pieces. DMLS is known for “one-upping” the machining industry. When parts can be manufactured in a matter of hours at detail levels far superior than traditional machining, 3D printing caught the attention of product developers and engineers. Not to mention, DMLS is almost entirely geometrically independent when it comes down to designing parts; good bye machinists and CNC cutting, hello DMLS 3D printing!
Selective Laser Sintering (SLS) is very similar to DMLS, but typically it just revolves around different materials. Layers of material powder will be stacked up on a build table and melted together in accordance to the design, just like DMLS. The part will be able to “float” within a bed of powder, so supports aren’t necessary! This technology is great for product developers and designers around the globe, as a wide variety of materials can be made at great detail without the use of supports!
Fused Deposition modeling (FDM) is an interesting form of 3D printing, and one of the most popular. Essentially, a nozzle aided by a computer will draw from a spool of material in wire form. This nozzle is very hot, and will melt the material and stack the melted material layer by layer to create a final product. Think about a hot glue gun as an analogy; material (or the glue) will be pushed through the hot nozzle, and the glue (or material) will be stacked up to make a final product. Stratasys, a 3D printing company, truly outdid themselves when they developed this technology and they are making it more affordable than ever!
Multi-Jet Modeling (MJM) is very similar to FDM technology. Imagine the same exact process, except there are multiple nozzles. Objet, another well respected 3D printing company, did a great job when they came out with “digital material,” in which multiple colors and materials can be used in a single print.
Ink Jet 3D Printing is one of my favorite styles, as it allows …
Different Types of Industrial Weight Scales and Their Individual Features
Do you know how the scales weigh down to the most intricate details in big industries? It has been noted that a lot of different places use good quality industrial weight scales, which work perfectly with the heavy-duty weighing that has to be done. In this article, we will discuss the types of these weighing scales, their efficiency as well as pros and cons.
What you would have to know first about these big industrial weight scales is that they all have a certain capacity when it comes to weight. There are different kinds of products, which need to have exact measurements. For that purpose, certain kinds of scales are useful because they are not just big, but they are also incredibly good in making sure you get the exact weight measurements even though the products might be very heavy.
So, when using such scales, make sure you know the different types. The first kind is the basic weight rails. These are a pair of heavy-duty bars over which you can place the items you would want to weigh, and it would be done in a flash. This is one of the best solutions for those complicated, What Is Tertiary Industry very dense stuff that is extremely difficult to lift and put on almost any other scales. These are quite useful and they have a high rate of tolerance to the substantial mass. The only problem might be that the bars can get a bit tricky to balance the lighter and smaller items put on it.
You can also check out the Low Profile scale cart, which is a small cart with small round wheels attached to it, so that the products can be weighed and at the same time moved around. Among other industrial weight scales, this is easily one of the most versatile products, since they can carry up to a weight of 10,000 pounds, which is quite a lot. They are also accurate and have a digital scale that can read up to decimals. However, sized around five square feet (length and breadth), it can be deemed as being pretty small for really hard tasks. One of the other products that is similar in nature is the Horseshoe scale, which can actually measure and at the same time carry, via the pallet truck mode. They have a capacity of hauling up to 10,000 pounds as well, and they are incredibly efficient as well.
If you want your trucks to avoid getting a ticket, then a handy-dandy weighing machine for the truck wheels is a good option. These can withstand up to 60,000 pounds of weight, and you can easily make sure your truck of goods does not get a ticket, with one of these industrial weight scales.
So, with quite a few different choices, you now have the option to select what you would really want to have. Before setting down with a purchase, it is a Manufacturing Engineering Salary good idea to think of the purpose …
Industrial Paper Shredders – Uses And Types
Industrial paper shredders are needed to shred large amount of paper materials and avoid other consumers looking into the resources that are important and sensitive for big organizations. It is ideal and helpful for use in big companies and businesses.
Uses
Every corporation or business have their very own classified and confidential documents and records which may be harmful towards the business if it gets to the wrong hands. These heavy duty paper shredders can help shred large volume of materials effectively. It is usually designed to shred large stacks of paper and much more at a time. It also shreds an enormous quantity of cardboard containers, file folders, plastic bottles, aluminum cans and much more.
Types
There are different types of industrial shredders which are useful for various purposes. e.g. high security and government establishments use shredders for various uses: strip cut, cross Learn About Tech Industry cut, micro cut, medium volume commercial, industrial and high volume shredding. The paper shredders are listed into categories based on their security levels, capacity and power.
Industrial grade machines are designed to meet the shredding requirements of numerous departments as well as the whole facility within the most appropriate and secure approach possible. It is created for the maximum performance. It can handle more than hundreds of paper sheets directly and more than thousand pounds of paper products per hour.
Keeping Corporate Information Medium Industry Confidential
Industrial paper shredders are used to destroy any kind of document or CDs with sensitive information. Information that range from business and new product plans to marketing and financial data and so forth. More and more firms are either looking for a good on-site commercial shredder or else employing a shredding service. If you are concerned about eliminating the risks of having vital information leak out, it’s time to seek out a good solution.…
Ear Piercing – History and Types
The history of ear piercing goes back to ancient Perspolis in Persia. It is recorded that there were illustrations of soldiers with earrings in the walls of this city. During Dark Ages earrings and other jewelry declined as almost all the populace was impoverished. After the rise of nations later jewelry including earrings was the sign of luxury and high status in society. During the Middle Ages gorgeous dresses and elaborate hairstyles were in fashion and earrings were not so popular. But a bit later when the hair was worn up and the collars became higher earrings got back their popularity. During the next centuries more and more skillful jewel experts appeared and new types of earrings were designed.
In the middle of 19th century it was popular to tied the hair behind the head covering the ears, hats were in fashion and there were no place for earrings. It was also the time when society and religious establishments associated earrings with excess, vanity and heathens and earrings lost their popularity. At the beginning of the 20th century Concept Of Manufacturing Pdf non-pierced clip-on earrings appeared and simultaneously sailors began to wear earrings as the symbol of their adventures. In the sixties hippies and homosexuals were those who helped to rise the popularity of earrings, in the seventies punk rockers inspired the wearing of multiple earrings and in the eighties women began to wear earrings.
Nowadays ear piercing is the common type of body modification which is popular with men, women and children all Benefits Of Service Growth In India over the world. Sometimes parents pierce the ears of their daughters even when they are only one year old.
There are various types of piercing and the most widespread is ear lobe piercing. It is the less painful type of ear piercings. Though the soft tissue of the lobe is the best place for quick painless piercing there are at least eight other places where ear can be pierced. The other popular types of ear piercing are vertical, industrial, helix, orbital and anti orbital piercings. Helix piercing is a piercing along the outside rim of the ear and though it is rather difficult to do it is still very popular nowadays. The other widespread type of ear piercing is industrial piercing that joins two holes in the ear with a long straight barbell and you can also wear two single barbells in these holes. Ear gauging is the other popular type of ear modification- a noticeable or even very large hole in the ear lobe looks up-to-date and unusual at the same time.
The healing process of ear piercing lasts for about two months and it is important to follow all recommendations that include keeping the wound clean, avoiding swimming, not keeping phones and other subjects close to the pierced ear.
The choice of ear piercing jewelry nowadays is very wide and there are many trusted on-line jewelry stores that offers high quality and stylish barbells, captive bead rings, ear …
What Are the Different Types of Paper Machines?
Are you the owner of your self-made enterprise? Running a business is no mean task. The most important fact is to keep track of the cash flow of your organization. You must keep Industrial Engineering Courses detailed records of the profits gained and the losses incurred. Wouldn’t it be great if you could save a substantial sum of money each month in addition to your normal savings?
The most commonly used object in most offices is paper. If you need to fold paper, make business cards or trim papers along the sides, you have to hire printing firms to do so. What if these tasks could be completed in your office itself? You will be able to save a lot of time and money in the process. That is why you should buy high performance paper machines for your office.
There are various types of paper machines such as:
Shredder – This machine, as is evident from the name, shreds paper. When you need to clear out your old files and documents, the shredder can dispose of them effectively within a short span of time.
Business Card Printer – Why don’t you buy one of these instead of outsourcing the task to another company to print business cards? Machines nowadays can print up to 375 cards in one minute.
Paper Folder – When you need to fold your documents, all you need to do is to feed the paper into the tray. The folder will automatically fold the sheets according to your requirements. Did you know that the Marquis iFold 300 is the only machine that can stack three sheets and fold them in one go?
Booklet Maker – Occasionally, you may have to make booklets or brochures to give to your present and prospective clients. Handing out pamphlets becomes more important if your company is holding a seminar or a conference. A booklet maker can easily fulfill this purpose easily.
Apart from the above, there are various types of paper machines available in the market that suit different types of purpose. For instance, a paper trimmer is used to trim sides and laminating machines can laminate paper via an automated process. Want to purchase these machines for Light Industrial Real Estate Definition yourself? Just visit when you go online. They deal with industrial equipment and packaging supplies and sell them at affordable prices. If you buy in bulk, their representatives will work out a deal with you so that you can get a considerable discount. All set to place your order?…
Various Types of Bulk Storage Racks for Industrial Use
Industries like retail, construction, manufacturing, aerospace, marine and other big venues require an efficient and functional way to store items they sell or use. This is where heavy duty bulk storage racks are useful. These kinds of shelving units aren’t typically used in homes or small businesses, but they are a must in the above mention industries.
Retail can include grocery, clothing, toy, tire, welding and gas supply, paint, home improvement and any other kinds of retail stores. Many times bulk storage racks are used more in the storeroom than they are in display areas, but some retail stores do use them as extra shelving in the areas where consumers shop to promote food or clothing sales. For instance, you have most likely seen tires on really heavy duty racks on display at your local tire store or wood displayed in really tall racks in home improvement stores.
Construction applications for these kinds of racks are used back at a storehouse or warehouse or they can High Demand Products also be used in the modular buildings onsite or in truck trailers that bring supplies to the site.
Manufacturing, aerospace, marine and other large industrial applications might include bulk storage racks to organize tools and other supplies so workers can find what is needed when they need it.
These ultra-sturdy and functional bulk racks can also come with various colored shelves for color coding which is a very efficient way to keep things organized in large industrial venues. They are also usually forklift-friendly as you may have seen in home improvement stores. The materials used for this type of storage unit can include wood, tubing, steel or metal beams, steel cross-ties, particle board shelving or metal shelves. They are designed and constructed specifically for accommodating heavy objects and most do meet state and OSHA safety standards.
Sometimes certain industries have custom racks and shelves made to fit a specific need. That’s when they use the services of a company like Material Handling Solutions. Journeyman Electrician Test Otherwise most of the businesses that need heavy duty bulk storage racks buy from reputable companies like Grainger, Easy Rack, Rack and Shelf and Gilmore-Kramer.…
Various Types of Industrial Floor Scales
There are a number of floor scales that are able to be purchased in a number of different sizes and for unusual purposes. One of the most commonly utilized kinds are the industrial scales. These are utilized to weigh a variety of products and materials that are being manufactured.
These can be bought in medium to large sizes counting on the products that you have to keep track of. The size counts as does the quantity of weight that it is able to hold at one time. They are able to maintain between 2,500 to 30,000 pounds. The ones that carry the large quantities are commonly connected to a forklift that will move them from one place to another.
An industrial floor scale has the ability to be constructed utilizing welded steel that is painted with a zinc epoxy coating or enamel. Both of these serve to protect it from eroding and give it Businesses With Low Barriers To Entry the ability to last longer and to be used in warehouses or outside. The scales that are employed round corrosive chemicals or water on a daily basis will be constructed using stainless steel.
Another common material that is employed to build them is aluminum. This exceptional type is utilized by companies who must move them and Electrician School their products around the warehouse or to different locations. The aluminum makes it lightweight and one of the easiest to transport.
If you want one that is newer and has a great deal more features to it then you may want to consider the electronic floor scale. Although they are more high-priced they can give you the weight in pounds, kilograms, or any other measurement that is convenient for you. Many of these units are lightweight making them simple to transport utilizing dollies or other such items.…
The Six Most Common Types of Teflon Coating
The name Teflon has pretty much come to be associated with the term “non-stick,” but Teflon coatings go far beyond providing a non-stick surface. Within the industrial and engineering worlds, a Teflon coating can make or break a machine or product.
There are many different kinds of Teflon coatings, but here are the six most common types:
1. Teflon PTFE – Probably the most popular type of Teflon coating is PTFE, which is short for poly tetrafluoroethylene. This type of non-stick coating consists of a primer and then a top coat. Out of all the fluoropolymers out there, PTFE can handle the highest temperatures, reaching all the way up to 500 degrees Fahrenheit. Another great advantage of PTFE is the fact that it has a very low coefficient of friction. It is also very resistant to abrasions and many types of chemicals. The only downsides to this particular type of Teflon are the facts that it comes only in liquid form and that it is water-based.
2. Teflon FEP – If you’re looking for a film that is non-porous, then FEP, also known as fluorinated ethylene propylene copolymer, is probably your best option. During the baking process, this type of coating actually melts and flows. FEP is quite resistant to most commonly used chemicals, and it is a very non-stick type of coating. In addition, it comes in both powder and a water-based liquid.
3. Teflon PFA – This type of Teflon coating is similar to FEP in some ways, but it tolerates a higher temperature during continuous use, going up to 500 degrees Fahrenheit. PFA (or perfluoroalkoxy) Capacity Utilization Fred is also tougher than either FEP or PTFE, so it can handle a lot more than the first two types of Teflon coating. Like FEP, it comes in both powder and a water-based liquid.
4. Tefzel ETFE – Probably the toughest fluoropolymer on the market is ETFE, which is sold by Teflon under the Tefzel name. This particular Medium Scale Industries type of coating is not completely fluorinated, which is important in some applications. It comes only in powder form though.
5. Teflon One Coat – If you are looking for a Teflon coating that is solvent-based rather than water-based, then One Coat might be the solution you need. This type of coating has been blended and tends to be very tough and extremely resistant to abrasions. Another benefit of One Coat is the fact that in some cases, it will work with smooth metal surfaces, unlike the others that require a rough surface in order to help it stick.
6. Teflon Dry Lubricant – In situations that involve a lot of pressure and high velocities, Dry Lubricant is often the best choice. Like One Coat, it is solvent-based, although these particular coatings are designed a bit differently so that they work better under high amounts of pressure or velocity.
A Teflon coating is perfect for applications on aluminum, steel, steel alloys, stainless steel, brass, glass, rubber, fiberglass, and …