The installation of flexible automated manufacturing is a turning point in the life of a company. It is important to have the employees as involved as possible in the installation. During this time some training will occur, either formal or informal. Management needs to be sensitive about giving directions concerning the new implementation. It is important that employees have a good understanding of the installation plan and how the final result will impact their daily work. Management can schedule for production workers to work along side installation personnel. This will help the employees to get a better understanding of the equipment of the flexible automated manufacturing and what can be expected of it. Also it will help the employees to cultivate ownership of the new manufacturing equipment and the benefits it will afford the company.
Before the actual shipping of the equipment that makes up the flexible automated manufacturing to the purchasing company, production managers from the purchasing company review its performance at its own manufacturing facility. Each piece of the system is tested individually. As near a production load as possible is put on each part of the flexible automated manufacturing. As the tests are performed the equipment performance is checked against the specifications that are expected. If any of the flexible automated manufacturing fails any of the tests the production, management makes note of the exact failure and disqualifies the equipment from shipping until it can pass the test. Once the tests are complete the production management of the purchasing company signs off as to having attended the tests and that the results of the tests were successful for equipment that will be shipped. The equipment is crated and shipped to the purchasing company location. There may have to be adjustments in the shipping schedule if any equipment does not pass the tests.
Most of the time the purchasing company and the system integrator will agree on the most practical order for the flexible automated manufacturing to be installed. The company will want this installation to disrupt its manufacturing operations as little as possible. Sometimes the install will be set up to occur in phases. This can be done so that the company does not have to wait until all the equipment is installed to start using it. The phases will be set so that some equipment can be installed and the company can bring some or all of those machines into production immediately. Generally there can be four phases that are required for a full system installation.
If there are CNC machines or other heavy devices that are to be installed, phase one of the process would be the time when floor excavation would be done. Any recovery systems, such as chip removers or coolant systems would be installed in this phase. Conduits for the utilities would be installed to support the new machinery. Foundation slabs would be reinforced, poured and started to cure.
The second phase of installation would include any floor lines for automation guided …
Category: Electrician
Why Does Organic Food Matter?
With the cost of food being what it is today, you may be asking yourself if buying organic is really worth the price. Will it be that much better for you? You have, after all, made it this far without it. My hope is that after you read this article you will change your mind forever.
As your eyes take you on a journey through this informative article, you will begin to realise just how much has been missing (or added!) in your day to day diet. The difference in farming practices alone is enough to set organic food into a league of its own. Let me give you a run-down of three major points:
1. Organic food uses no chemically synthesized fertilizers, pesticides or insecticides; industrial farming uses all three.
2. Organic food has no growth hormones or antibiotics and is not genetically modified; once again, industrial farming usually has all three.
3. Organic farming practices, by their very nature enrich the soil and improve the health of our planet; industrial farming practices rape the soil of its nutrients.
Once you relate these three points to your own health, I am sure you will begin to agree that the ramifications and consequences are apparent to your health. Shall I take you deeper?
Chemicals and Your Body
Do you remember the scare that was put into the public about DDT (Dichlorodiphenyl-Trichloroacetic Acid)? Evidence suggests it causes abnormalities of liver function, skin and the nervous system. DDT was used on our crops from 1945 to 1972 and is still used today as a deterrent for malaria. Here is a list of some other modern day chemicals used in industrial farming:
1. Alachlor: This herbicide is used for weed control on soybeans, corn and peanuts since 1969. It has been shown to lead How To Find Suppliers For Online Store to eye problems, liver problems, anemia, kidney or spleen problems and a better chance of cancer (Gustafson, 1993).
2. Atrazine: Atrazine is an herbicide they use on corn and have for decades. When ingested it can cause cardiovascular and reproductive problems.
3. Endothall: They have been using this herbicide on spinach, sugar Industry Trends Analysis beets and potatoes. It can lead to stomach and intestinal problems.
4. Lindane: This is an insecticide the use on cattle! Ingesting Lindane can cause liver or kidney problems.
5. Methoxychlor: They use this insecticide for fruits, vegetables and livestock. It can cause reproductive problems.
Keep in mind that this is only 5 of the approximately 70,000 man-made chemicals that are affecting us in our daily lives. If you haven’t been sickened enough, dig a little on The History of Water Filters.
Genetically Modified Organisms (GMOs)
In order for you to understand the disastrous effects of genetically modified food, you have to dig very deep indeed. Morgellons Disease has been discredited by doctors as being a figment of our imagination, but how can they when there is physical proof? Victims of Morgellons have given us this proof …
Automotive Service Advisor Careers
The Canadian Automotive industry will be looking for 92,159 new employees by 2014, with 94 % of these jobs full time positions. Clearly, now is a good time to get in the automotive industry and a great time to train for a career as an Automotive Service Advisor. If you have a passion for cars and enjoy working with people, there are countless diploma program available that will help you focus your customer service abilities and give you the skills you need for an exciting career in the fast-paced, dynamic automotive industry.
By graduating from a top-notch automotive service advisor training program, you will be opening the door to the many opportunities in the global Automotive Industry. Most people are not aware of the types of customer service and customer care positions available in this resilient industry. These positions include:
Automobile Service Writer
Wholesale Retail Parts Representative
Tower Operator
Retail Parts Clerk
Warranty Administrator
Appointment Coordinator
And More
The automotive repair and service industry is a large and thriving sector of the North American economy, and graduates of these programs will have their choice from a wide range of career opportunities in auto repair, service facilities and a variety of dealerships, including:
Canadian Tire
Parts Source
Midas
Active Green & Ross
Benson Tire
Jiffy Lube
Transportation Quaternary Sector In Indonesia Companies
Independent Shops
Subaru
Mercedes
Chrysler
Ford
Volvo Industry And Competitor Analysis Pdf
Toyota
Honda
Volkswagen
Hyundai
Best of all, positions in this area of training often leave room for advancements, giving entry level employees the chance to work their way up to Service Manager or Assistant positions. Employees in the parts department of most auto repair shops will also see the same type of advancement opportunities, and can become Parts Managers or Assistants. The future, in other words, is very bright for qualified, well-trained candidates. Don’t hesitate, turn your passion for cars into a well-paying career.…
Mobile Technology Meets the Automotive Industry
Mobile technology is not isolated to one particular sector. While tech-savvy individuals do put mobile technology to work everyday, it’s not solely them who enjoy the benefits of this important societal advancement.
More and more industries are learning that the future is mobile. Because of the growing ubiquity of mobile phones, there is no single industry that could not benefit in some way from implementing mobile technology. One such industry that can (and does) benefit from mobile technology is the automotive industry. If you’re involved in this competitive sector, then listen up: mobile technology can help you run your business more smoothly, and can also allow you to tackle problems with more creative and innovative solutions.
One of the most interesting aspects of mobile technology is the advent of QR codes. These codes are becoming more and more commonplace, and are by far the best way to get a consumer to a website landing page.
Here are just some of the ways by which QR technology can be put to good use in the automotive industry.
Custom-Designed QR Codes
QR codes are an excellent addition to any business. While they provide many ways for companies to get their target audience to a website landing page, the problem arises when you consider the sheer amount of QR codes that are bombarding consumers every single day. If you’re an automotive company who wishes to stand out, you’ll want a QR code that will be both iconic and memorable. That’s where custom QR codes come in. Now you don’t have to settle for a QR code that’s black, white, and mundane; custom-designed QR codes allow businesses to have codes that incorporate their logos, background imagery and chosen colors.
Specialty QR Codes
While fancy, aesthetically appealing QR codes are nice and flashy, it’s what’s on the inside that counts. That’s where specialty QR codes come in. This technology is not solely for bringing customers to a boring landing page – people need motivation to scan a QR code… And you need to provide them with a call to action to do just that.
Consider some of these innovative solutions that can be incorporated into the automotive industry.
Tag2pdf – You can use Tag2pdf to get vehicle information directly to a customer. QR codes can be placed on car windows; when scanned, the interested customer will have the option to be emailed Manufacturing Engineer Technology all pertinent information about the car. This is easily the quickest and most efficient way to get comprehensive information about a product directly into the hands of a customer.
Tag2win – Customers can scan a Tag2win code to automatically be entered into a contest to win an automotive prize. This is a great way to spike consumer interest.
Tag2video – Tag2video provides an incredible opportunity for the automotive industry. These codes can be scanned to deliver a video right to your customers’ phones! The implications of this are obvious: instead of having a boring, static advertisement, you can bring things …
Choosing Automotive Accessories Of True Value
When the biggest automotive aftermarket show in North America, and even perhaps the world breaks its attendance record, then you know that there is a reason for the renewed optimism that automotive accessory manufacturers are showing these days. Although aftermarket sales by SEMA members for 2012 are expected to reach almost 30 billion dollars, this is still 4 billion short of its record from five years ago. Seems improbable that its beginnings were as an informal swap meet held in 1976 at a stadium in Los Angeles.
SEMA executives have also reported that China and the Middle East have seen explosive growth. These are two entirely different, and dare we say opposite markets however, as Middle East buyers from oil-rich nations do not think twice about extravagantly spending for cars and luxury aftermarket items. China, on the other hand, is justifiably derided for having manufacturers that turn out inferior and unsafe copies of popular aftermarket products and designs.
Along the way though, car owners and enthusiasts have seen an explosion of new products from competing manufacturers. These include HID lights, coilover suspensions, engine upgrades and body kits. In terms of mechanical and electronic upgrades, the best seem to come from German, Japanese and U.S. companies. The aftermarket Is Kenya Good For Business includes about a dozen categories, ranging from business services, to collision repair and refinishing, to wheels and tires, mobile electronics and technology, utility vehicles, racing and performance parts, vehicle restorations, body kits and restyling and car care. It also includes a host of other products ranging from automotive accessories to tools and equipment.
These new products are sold in traditional brick and mortar outlets as well as online. Nowadays, with most people cramped for time, online sales have also grown exponentially. And often offer the same products cheaper. What’s more, it’s so much easier to compare prices from the comfort of wherever your are, instead of physically going to different stores to check out the same items. This is not to say that you can do all your shopping online. For example, purchasing a coilover suspension Types Of Manufacturing Industry and setting it up properly are two different things, and the experience can sour if the product support is not there. Then again, some shops don’t really offer any product support at all. With the vast amount of information available on the net, however, it’s very easy to look up user and long-term review of the products you are looking at. Do remember that you get what you pay for and what looks like a terrific automotive upgrade now may turn out to be a piece of junk down the road.…
Industrial Layout
Industrial Layout is a discipline of technical drawing which is a combination of architectural and survey drafting. The application of this drafting discipline are used in almost any type of manufacturing including and not limited to plastic injection molding, furniture fabrication, automotive parts manufacturing, etc. It is where a plant floor plan is drawn out exactly to scale and used for planning the functions of an industrial fabrication process or processes.
The drawing starts with the blank or open floor plan of the plant which shows all the structural members of the building which are visible on the plan view and includes columns that How To Start A Business Plan are out in the floor area, interior offices, exits, etc. If the plant already has fixtures, presses, molds, generators, cranes, elevators, or work stations, these are included also.
If the building is void of any fixtures, the industrial or plant engineer makes sketches on the plan locating all the machinery and work stations that will be in the plant so that the drafter can add them to it an it can be used once the plant is fully operational. There is almost always one particular master drawing of the building that, as time goes on, is updated as the plant grows or new processes are added or removed.
From the main layout drawing, localized drawings are made at a larger scale of particular areas of the plant. If a new area is drawn or designed, these drawings are then integrated into the main plant drawing to keep it up to date. Sometimes machinery manufacturers will send detailed drawings of their machines or presses which can also be added into the main drawing.
Over the past century or two since the beginning of the industrial revolution, these drawings were maintained manually on the drafting board which was very labor intensive. With the advent of Computer Assisted Drafting, drawings can be easily integrated into one another just by importing a CAD file.
The drafter who keeps these drawings updated are usually given the title of general drafters. The term general is used because of the many disciplines What Is Quaternary Industry they must posses to perform their job. These include but are not limited to architecture, survey and topographical, machine or mechanical drafting.…
Industrial Layout
Industrial Layout is a discipline of technical drawing which is a combination of architectural and survey drafting. The application of this drafting discipline are used in almost any type of manufacturing including and not limited to plastic injection molding, furniture fabrication, automotive parts manufacturing, etc. It is where a plant floor plan is drawn out exactly to scale and used for planning the functions of an industrial fabrication process or processes.
The drawing starts with the blank or open floor plan of the plant which shows all the structural members of the building which are visible on the plan view and includes columns that How To Start A Business Plan are out in the floor area, interior offices, exits, etc. If the plant already has fixtures, presses, molds, generators, cranes, elevators, or work stations, these are included also.
If the building is void of any fixtures, the industrial or plant engineer makes sketches on the plan locating all the machinery and work stations that will be in the plant so that the drafter can add them to it an it can be used once the plant is fully operational. There is almost always one particular master drawing of the building that, as time goes on, is updated as the plant grows or new processes are added or removed.
From the main layout drawing, localized drawings are made at a larger scale of particular areas of the plant. If a new area is drawn or designed, these drawings are then integrated into the main plant drawing to keep it up to date. Sometimes machinery manufacturers will send detailed drawings of their machines or presses which can also be added into the main drawing.
Over the past century or two since the beginning of the industrial revolution, these drawings were maintained manually on the drafting board which was very labor intensive. With the advent of Computer Assisted Drafting, drawings can be easily integrated into one another just by importing a CAD file.
The drafter who keeps these drawings updated are usually given the title of general drafters. The term general is used because of the many disciplines What Is Quaternary Industry they must posses to perform their job. These include but are not limited to architecture, survey and topographical, machine or mechanical drafting.…
Contribution of Footwear Manufacturers in Indian Economy
In recent years, Indian economy has surged at a good pace, and when we talk about various industries which have contributed in its growth and expansion, the Indian leather industry comes at top place. And now, several leading brands of world-leading countries such as US & Europe are either importing or looking forward to get the leather chemicals, pure leather and products made from it, from India. Apart from this, the leather industry in India is also one of the oldest one and currently employs approx. 2.5 million people. However, among all leather products that are being manufactured in India, footwear manufacturing in India holds the top position.
Moreover, reports from the Department of Industrial Policy and Promotion of various industries also stated that the Indian leather industry is developing at a very good pace. However, till now Indian leather industry has contributed approx. 3% in the global trade, whereas China contributes approx. 20%. To increase the competitiveness of the Indian industry, Indian Finished Leather Manufacturers and Exporters Association and the Government of India are making efforts to promote this industry and increase the market share.
As a result, India is also being considered as one of the top most destinations all over the world for investing in leather products. Apart from this, when footwear is being manufactured by an Indian footwear exporter Pune, Chennai, Gurgaon, the use of premium quality laces, cushion, sole, adhesive, steel shank, hook, heel, polish and chemical finishes etc. is ensured by the concerned authorities.
Though leather industries are situated in almost every Indian state, Tamil Nadu, the southern state of India provides almost 60% of India’s best leather. Industrial Growth Definition On the second and third position are Maharashtra and Delhi respectively, which are then followed by various NCR regions and other states.
The Indian Finished Leather Manufacturers and Exporters Association is the main strength behind the manufacturing of various lather products in India. It has been established to promote and protect the Interest of its each and every member involved in the leather trading activity whether at home or abroad. Safety Powerpoint Presentation It provides sensible advice and help manufacturers and traders to deal with the problems associated with their work of manufacturing and trading of finished leather. And, since its inception it has been able to help many companies to grab better opportunities and increase their growth potential.
Apart from those discussed above, the Shoe style fashion design India is in huge demand in the global market and has created a niche for itself globally.…
National Defense and Tungsten
Recently we have heard a lot of news about the rare earth metals, and the supply issues these metals are having. There are a few highly critical rare industrial metals that are also having supply issues. China has a near monopoly with many of these metals. Currently China has up to a 95% monopoly on the mining and refining of many of the most important rare industrial metals also known as rare technical metals. The British Geological Survey has produced an interesting report called the Risk List 2011. Read over the list and see for yourself. The metals on this list and other lists like it are needed for over 80% of all worldwide industrial uses.
The rare industrial metal I would like to discuss today is tungsten. On the list it scored 8.5 out of 10. According to the USGS China mines 85% of all tungsten. Similar to rare earth elements China has decided to cut back on its exports of tungsten. The British Geological Survey ranks tungsten higher on its list, than it does rare earth metals. In 2010 recycled tungsten was a promising 37% of all metal used. When you have a tight supply chain and then the top producer cuts its exports, this causes huge ripples throughout the worldA�s economy. China is the largest producer and the largest user of tungsten. In order to protect its own supplies of tungsten, China has begun to invest in mining projects outside of its borders.
The national defense industry has grown to depend more on tungsten due to its extraordinary properties. Tungsten has the highest melting point of all metals, the highest tensile strength of all metals, and it is highly resistant to corrosion. Tungsten is one of the refractory metals, which means it has high resistance to heat and water. The other refractory metals include molybdenum, tantalum, niobium and rhenium. Here I am going to list some of the military applications of tungsten.
Replacement for depleted Types Of Industry uranium bullets
Armor piercing bullets, anti-tank weapons, bunker busting systems
Penetrators
Shrapnel head
Radiation protection (Submarines)
Lubricants
Armored vehicles
Grenades
Anti-vibration, counter and anti-flutter weights (aviation)
Superalloys for turbine blades, propellers, Industry Competition Meaning rotor blades and flight control surfaces.
According to the USGS the total tungsten mined in 2010 was approximately 61,000t. Total worldwide reserves are around 2,900,000t of which China has 2,000,000t. Canada, Kazakhstan, Russia and USA have significant tungsten resources. Many nations are attempting to invest in their mining industries. We have seen many news stories concerning countries like the USA, Canada, Japan, EU, Russia and Brazil investing large sums of money looking for new resources within their nations and abroad. There is much geo-political uncertainty throughout the world. Countries are seeing that they need to be independent or be at the mercy of other nations. This all means profits for rare industrial metal investors for the foreseeable future.…
Proper Mining Tools for a Safe Environment
Everything in the world is sourced either through farming or mining. When you do not grow your ingredients and raw materials you have to get them from somewhere and the best place to get that would be through mining.
Mining takes materials from natural resources making use of various processes that may range from something as simple as excavation to as complicated and dangerous as concrete demolitions. All of these processes that are used to source valuable raw materials are essential for the success of the mining.
However, you do need to take into consideration that in the process of retrieving these important materials, the welfare of The Balanced Scorecard Is An Example Of other important things is overlooked. In some cases, this is the environment where people source all of the materials.
When you remove and add items that are vital to the composition of the environment, you will have undeniable impact on it. You cannot however, just pick up and stop your Top Hr Consulting Firms In India operations. That would mean you will no longer be able to get these valuable materials and we cannot have that. What you would need is a balance between the two.
It is hard to keep the balance between protecting the environment and sourcing raw materials but it can be done with a little bit of diligence and a lot of hard work. Maybe, if we use some tools we can keep the environment a lot safer.
The problem with the mining process is that it takes too much time to complete it. The area is exposed to many items that will slowly be weathered if it is not processed quickly. Some items facilitate quicker working times such as the vacuum loader which pulls debris out excavations like a giant vacuum cleaner.
Another great tool used in mining is the abrasive blasting apparatus. It is commonly known as a sandblaster but it can also be used to help clean off loose and large debris off of blast sites in excavations. This prevents the dangers of loose debris flying off when using large industrial drill to dig through rock.
You also need to consider using wet blasting machines in surface preparation jobs in a mine. In most cases, it uses safe materials like water to help rid surfaces of debris. This does not add dangerous chemicals to the environment but still remain effective for the task at hand.
Furthermore, you will find that these special tools not only protect the environment, it also helps protect you and your people from possible injury. After all, the people working for you are also part of the environment. A person running a mine has the responsibility of not only delivering the goods but they also need to keep their environment and people safe.
These are just some of the many tools you need to consider when you want to enter the mining business. These are effective tools that will get the job done. However, you …