10 Questions you should ask before buying second hand industrial laundry washing machines.
Question 1) Is it Safe?
Let’s face it a 3000Kg machine that’s got a spin cycle of 750rpm could be lethal if something goes wrong. The current guidelines by the Health and Safety Executive ( HSE UK ) states that both the seller and the buyer are responsible for machinery safety. The seller cannot simply state ‘ Sold as seen ‘ to protect himself against his liabilities. If the machine you are looking at appears to have little or no evidence of maintenance, or generally looks in bad condition – walk away and don’t consider it. Your safety, and that of your employees is always paramount.
Question 2) Do you know its history?
If you are buying a machine from site, it’s always a good idea to see the machine operating in situ if you can. Always enquire how old the machine is, what hours it has operated at, and as to see the meters if installed ( older machines may not have them ). Caution – If the machine has been out of service for some time and left idle, it may develop faults, for example ‘ flats ‘ on the shaft seals, leading to major repairs.
Question 3) What about the machines’ structure?
Are there cracks around the drive assemblies? What about the seals and drive bearings? What about corrosion and wear on the dampers, door seals, locks and hinges? Our advice is: Use a torch, get on your hands and knees and inspect it inside and out – and if in doubt use a qualified engineer to provide an objective machine condition report.
Question 4) What sort of process controls does the machine have?
You need to ensure the machine you look at has the relevant controls for the variety of processes you will require. If it doesn’t, it could be inefficient and cost you more to run. Check the wiring – is it neat – or a tangled mess? Is there a wiring diagram and operators manual? Does the machine have a card or drum control? A dedicated microprocessor or a PLC? Consider what’s on offer as it may have staff training implications if it’s an unfamiliar type.
Question 5) Are spares and support readily available?
All industrial laundry equipment requires regular servicing and spare parts from time to time, to provide optimum efficiency. This will be a financial headache if the machine is a rare model and the parts are expensive and difficult to get hold off. Not a problem you need if your machine has broken down, leading to inconvenient and more importantly, expensive down-time. Also consider technical back-up. Who will service this type of machine?
Question 6) Does it come with a warranty?
Does the seller offer a warranty? 3 months? 6 months? Or if they don’t offer a warranty at all, you should seriously consider – why not? They obviously do not have much faith in the machines they …
Tag: machines
Quality Industrial Machines – Where to Find Quality Industrial Machines
Looking for quality industrial machines? With constructions, projects and other business continually thriving under the recovering economy, it isn’t surprising that more and more organizations are looking for quality industrial machines. The fact is that regardless of how cutting costs has become the norm nowadays, sacrificing safety and quality in favor of money is never a good thing. However, this doesn’t mean that organizations can’t save a bit of cash even while getting quality machinery for their industrial jobs.
Following are some tips on finding cheap yet quality industrial machines.
Not necessarily the best
Although the rule doesn’t always apply, most people find that the most expensive products are always the ones that carry the top quality stamp. However, this doesn’t mean that institutions have to stick to using just these products all the time. Try checking out the brands that are in the fifth or sixth spot when it comes to quality and they pretty much work just as well as the first one. The only difference is that their price is not as high as the top brand in the field. Back up this kind of decision by checking out various reviews and feedback regarding a particular product or brand before actually making a decision.
Buy from one What Do You Understand By Industrial Growth place
Buying a set of quality industrial machines from just one provider usually allows for the possibility of getting better discount. In fact, some stores have no problem slashing off a certain percentage of the total cost in favor of the fact that one is purchasing a huge amount of items. Of course, for those who find that buying from multiple ones result to cheaper prices can also opt to shop in different stores. The important thing here is that the buyers do the math to come up with the accurate numbers and therefore make an informed decision.
Versatility over Aluminum Door Window Manufacturing Specializations
There are currently various items that may be used for multiple purposes and more often than not, they are a better buy that equipment that only specializes on one task. This eliminates the need to purchase more items and therefore allows a group to save on their expenses. Of course, this usually depends on the situation and the possible results of the decision.
Browse to your Heart’s Content
Unless on a deadline, browsing is always important as this allows a person to explore the current price range placed on the equipment by different sellers. By knowing exactly how much the item is being sold for in another store, buyers have the chance to make educated decisions regarding their purchase without sacrificing quality of the product.
Of course, those aren’t the only methods one can find cheap but quality industrial machines. Different techniques may or may not be implemented depending on the current situation of the buyer. Keep in mind though that one shouldn’t be seduced by cheap offers to forgo the quality of the product. Considering how dangerous …
Variety Of Printing Machines: Importance And Uses
Like the flamboyant Information Technology domain, even the printing industry via printing machinery is a part of almost all types of working modules, be it the manufacturing sector, the service industry or for that matter than any other commercial aspect. This sector is generally classified as the publishing segment or the miscellaneous printing segment which combines all the small to medium scale requirements of any commercial holding.
This industry serves the industrial scope via all the 3 techniques; these techniques are as follows:
Letter Press Printing
Offset
Digital
With a plethora of printing machines like label, flexo and even CD printing machines going great guns, the business prospects in the printing segment are good.
Though all the 3 printing techniques are flourishing to a good extent since a long time now, the masterstroke though is the internet laden digital communication format, which is considered a boon. With digital communication dwelling and gelling well, the cost per unit and hence the service charges have considerably reduced. Also, the aspects like speed, convenience, quality, versatility and even the capacity to blend well (with the novel changes and requirements) have been improved to a good extent.
With due respect to all these techniques and procedures, base of the industry is – the printing tools aka the machines. There are a host of printing tools or machines like:
Gravure
Screen Manufacturing Engineering Magazine
Flexographic
Letterpress
Offset
Digital
Laser
Apart from these machines and the scope they support, the printing industry caters to a large requirement from the advertisement, publicity (banner, flex etc) and fashion accessories segments (includes, mugs, metals etc.). Hence, there are printing tools and machines which are made giving due importance to customizations. A good number of printing machines’ manufacturers offers such machines. Some common customized printing machinery includes:
Vinyl Medium Scale Industry
Ribbon
Mug
Metal
Banner
Label
CD
And as a matter of fact, the scope of the printing and publishing industry is increasing day by day. In terms of application, the jargon ‘effective printing’ has slowly moved on to become a term in itself within the printing sector fraternity. ‘Effective printing’ means choosing the right printing technique, tool and machinery for optimized and effective results.
Some aspects which hold ground while finding printing machines catering perfectly to the effective printing terminology are as follows:
Getting to know the requirement ( result)
Zeroing- in to the right printing technique with respect to costs of all types
Using the right printing tools/machinery with respect to costs of all types
With the combined printing industry worth billions of dollar, there are various brands offering a surplus of printing machines and accessories.…
What Are the Different Types of Paper Machines?
Are you the owner of your self-made enterprise? Running a business is no mean task. The most important fact is to keep track of the cash flow of your organization. You must keep Industrial Engineering Courses detailed records of the profits gained and the losses incurred. Wouldn’t it be great if you could save a substantial sum of money each month in addition to your normal savings?
The most commonly used object in most offices is paper. If you need to fold paper, make business cards or trim papers along the sides, you have to hire printing firms to do so. What if these tasks could be completed in your office itself? You will be able to save a lot of time and money in the process. That is why you should buy high performance paper machines for your office.
There are various types of paper machines such as:
Shredder – This machine, as is evident from the name, shreds paper. When you need to clear out your old files and documents, the shredder can dispose of them effectively within a short span of time.
Business Card Printer – Why don’t you buy one of these instead of outsourcing the task to another company to print business cards? Machines nowadays can print up to 375 cards in one minute.
Paper Folder – When you need to fold your documents, all you need to do is to feed the paper into the tray. The folder will automatically fold the sheets according to your requirements. Did you know that the Marquis iFold 300 is the only machine that can stack three sheets and fold them in one go?
Booklet Maker – Occasionally, you may have to make booklets or brochures to give to your present and prospective clients. Handing out pamphlets becomes more important if your company is holding a seminar or a conference. A booklet maker can easily fulfill this purpose easily.
Apart from the above, there are various types of paper machines available in the market that suit different types of purpose. For instance, a paper trimmer is used to trim sides and laminating machines can laminate paper via an automated process. Want to purchase these machines for Light Industrial Real Estate Definition yourself? Just visit when you go online. They deal with industrial equipment and packaging supplies and sell them at affordable prices. If you buy in bulk, their representatives will work out a deal with you so that you can get a considerable discount. All set to place your order?…
The Advantages of Using Stretch Machines
As advances are made in the field of packing, companies are upgrading the packaging techniques that they use not only to cut costs but also to ensure that the packing materials that they use cause less harm to the environment. For instance, Sainsbury’s has decided it will reduce its packaging significantly to ensure that its packaging does not harm the environment.
One of the best ways in which you can do your bit for the environment and also ensure that you save a good deal is opt for the stretch machines.
Since the stretch wrappers are made of more than one layer of material these can withstand a lot of pressure. This means that these will not tear even if a lot of pressure is applied on it. Moreover, this also ensures that you will be using much less plastic than before.
The material that is used in the modern stretch machines is usually pre-stretched. Thus the material tends to go back its earlier shape. The Human Resource Consultant Salary advantage of using this material is that it fits snugly around the product and eventually this ensures that the product is more secure.
One of the advantages of using stretch machines is that the entire procedure is completed without the use of human labor. Therefore, you should opt for these machines even if they seem to be somewhat expensive.
Human labor seems to be cheaper in the shorter run, but in the long term, if you take into account the amount that you pay to an employee throughout his working life, you will realize that employing a person is far more expensive than using machines. Moreover, you may have to pay for expensive treatment How To Learn About An Industry if any of your employees hurts himself during lifting heavy things for packing; so it is a better idea to switch to machines that can easily pack deal things. You may opt for the systems that have conveyor belts attached to them. These enable the users to complete the task far more easily.
If you are finding it difficult to determine which stretch machine to choose, you may seek advice from the manufacturers of these machines. In fact some of the better companies will also be willing to explain to you how you will save if you opt for the right equipment. As it is important to buy stretch machines from a reputed company only, you may opt for a trustworthy company like iPack.…
Residential Pressure Washing Machines Vs Commercial-Grade Machines
When looking to purchase pressure washers for cleaning commercial or industrial areas, do not choose machines built for residential purposes. Low-end pressure washers do not have the features and durability necessary for extensive commercial applications.
Commercial electric power washers not only offer greater cleaning capacity than home-use machines, but they last longer during the cleaning process, as well. These pressure washers are constructed from materials that are more durable and made to withstand rigorous cleaning.
One of the major problems with low-end pressure washers is their unreliability. In the middle of a busy day, with multiple tasks lined up, the machine might break down. You will lose your reputation, clients, and your investment in the machine if that happens.
Power
Pressure washing machines for industrial use feature higher pressure levels than home use machines. You can select power washers with a variety of different pressure levels, ranging up to 8000 psi. These machines are electricity powered and electricity heated.
Power also has a direct relationship to temperature. Commercial and industrial pressure cleaners are available in cold water, hot water, team, and tri-mode variations. The most versatile machines include tri-mode capabilities, meaning they can be used as cold water, hot water, or steam pressure washers. Cold Definition Of Quaternary Industry water cleaning is less expensive because it requires less electricity. Cold water can remove most types of dirt, including plant sap, dust, and mud. For degreasing or removing oils, emulsions, and sugars, hot water or steam is recommended. Electric power washers can reach temperatures as high as 330A�F..
Durability
When purchasing industrial pressure cleaners, look for features such as corrosion resistance. Corrosion can ruin even the most expensive machines. Many pressure washing machines are housed in steel casing, particularly powder-coated steel, which is highly resistant to corrosion and heat. Powder-coated steel does not chip easily, ensuring that your machine retains its new appearance for a long time to come. Heavy-duty, rugged pressure hoses and stainless steel or schedule 80 heating coils are other important components to look for.
Features & Technologies
The best industrial grade pressure washing systems boast technologies to enhance performance. For example, top electric pressure washers utilize automatic shut down technology which shuts off key components when the trigger gun is inactive for more than thirty seconds. This reduces unnecessary wear and the time spent going back and forth from the machine and the application.
Other notable features include different motor and power supply specifications, nozzles with different Lean Industrial Engineering orientations, quick disconnect to improve water efficiency, and continuous operation.
Productivity
Industrial pressure cleaners have heating times as low as 20 seconds. This is made possible by heating devices that utilize little energy for reaching maximum temperature in minimum time.
Hose lengths can vary anywhere from 25 feet to 300 feet and can be ordered based on the necessary requirements. To ensure maximum productivity when using up to 300 feet of pressure hose, look for machines with long hose technology. This offers maximum power for all applications, …
Everything That You Need to Know About Used Dowel Machines
What is a Dowel Machine?
A dowel machine is used to make a variety of wood products that conform to the technical definition of a dowel. For example, in addition to traditional “dowel rods”, pencil slats could also be considered dowels, and so could wooden poles. In most cases, woodworkers realize their need for a dowel machine based on two situations: the difficulty of making precision dowels and/or the need to increase production rate. In either case, a dowel machine will take the guesswork out of producing precision dowels. However, depending on your production needs, you may need to Electrician Apprenticeship Program purchase a wide moulder for dowel making instead of a traditional dowel making machine. Unlike most doweling machines, a wide moulder can produce multiple dowels at once, making it ideal for woodworking operations that exclusively manufacture dowels or that depend on dowels as components of their products. For hobbyist woodwork, small woodshops and larger woodworking operations that produce dowel products in small runs, a dowel-machine is usually sufficient. But for commercial woodworking operations that regularly produce dowels, a wide moulder is a necessity.
Is it Sensible to Buy a Used Dowel Machines?
Like all commercial grade woodworking machinery, dowel-machines are commonly purchased used to avoid the significant cost of purchasing them new. For established commercial woodworking operations, purchasing used dowel-machines serves as a way to improve their bottom line. But woodworkers that are on the brink of taking their operation into the commercial sphere often embrace the irrational belief that to start a new woodworking operation naturally equates Pre-Apprenticeship Electrician Training to buying new machinery. As a result, many woodworkers spend years using the majority of their increased profits to pay off their machinery. Unlike domestic grade woodworking machinery, commercial grade machinery is designed to offer top efficiency for decades, meaning that, as long as the machinery has been properly maintained by its previous owner(s), purchasing a ten-year-old dowel machine or wide moulder is essentially like buying a new machine.
How do you Assess the Quality of Used Dowel Machines?
Although industrial woodworking machinery is known for its durability, buyers must still be careful not purchase a machine whose former use destroyed its dependability. Practicing the following four steps will allow buyers to avoid such purchases. First, buyers should only make a purchase from a professional seller of used woodworking machinery; otherwise, the seller may not provide an accurate assessment of the machine’s worth. Second, buyers should investigate a seller’s reputation at the Better Business Bureau and avoid sellers that have unresolved customer complaints. Third, buyers should always request an official copy of a machine’s logged service record to insure its proper maintenance. Fourth, buyers should inspect a machine firsthand to assess its wear, or have an expert third party conduct the inspection. Following these steps will lead you to used dowel machines and moulders that offer new machine quality at a used machine price.…