10 Questions you should ask before buying second hand industrial laundry washing machines.
Question 1) Is it Safe?
Let’s face it a 3000Kg machine that’s got a spin cycle of 750rpm could be lethal if something goes wrong. The current guidelines by the Health and Safety Executive ( HSE UK ) states that both the seller and the buyer are responsible for machinery safety. The seller cannot simply state ‘ Sold as seen ‘ to protect himself against his liabilities. If the machine you are looking at appears to have little or no evidence of maintenance, or generally looks in bad condition – walk away and don’t consider it. Your safety, and that of your employees is always paramount.
Question 2) Do you know its history?
If you are buying a machine from site, it’s always a good idea to see the machine operating in situ if you can. Always enquire how old the machine is, what hours it has operated at, and as to see the meters if installed ( older machines may not have them ). Caution – If the machine has been out of service for some time and left idle, it may develop faults, for example ‘ flats ‘ on the shaft seals, leading to major repairs.
Question 3) What about the machines’ structure?
Are there cracks around the drive assemblies? What about the seals and drive bearings? What about corrosion and wear on the dampers, door seals, locks and hinges? Our advice is: Use a torch, get on your hands and knees and inspect it inside and out – and if in doubt use a qualified engineer to provide an objective machine condition report.
Question 4) What sort of process controls does the machine have?
You need to ensure the machine you look at has the relevant controls for the variety of processes you will require. If it doesn’t, it could be inefficient and cost you more to run. Check the wiring – is it neat – or a tangled mess? Is there a wiring diagram and operators manual? Does the machine have a card or drum control? A dedicated microprocessor or a PLC? Consider what’s on offer as it may have staff training implications if it’s an unfamiliar type.
Question 5) Are spares and support readily available?
All industrial laundry equipment requires regular servicing and spare parts from time to time, to provide optimum efficiency. This will be a financial headache if the machine is a rare model and the parts are expensive and difficult to get hold off. Not a problem you need if your machine has broken down, leading to inconvenient and more importantly, expensive down-time. Also consider technical back-up. Who will service this type of machine?
Question 6) Does it come with a warranty?
Does the seller offer a warranty? 3 months? 6 months? Or if they don’t offer a warranty at all, you should seriously consider – why not? They obviously do not have much faith in the machines they …
Tag: yourself
Keep Yourself in the Game With Electronic Manufacturing Services
You will be having an excellent idea regarding a mobile phone or tablet or some such electronic device. Something that you know will be a runaway hit Types Of Manufacturing Industries Pdf in the intensely competitive market. The natural course of action to pursue will be to float a company and start manufacturing without further ado.
This is easier said than done. There are a multitude of problems involved. For one, how do you procure electronic components necessary for the devices? Once these components have been located, how do you make sure that they Electrician School California are trustworthy? How can you assemble these, and get a desirable result? And most importantly, how do you cut costs so that you can launch the product at a price that will give other competitors a run for their money?
These are grave obstacles, indeed. However they need not come in the way of an excellent idea. In this highly technology oriented world, there is a simple and easy way out. Let us analyze these issues one at a time. Firstly, let us consider the components. Now it is a widely established fact that the most cost-effective and yet competent manufacturer of components is from China. Logical reasoning thus prompts you to order parts from China. This is, however not a simple process. For one thing, a start-up company will naturally require only small volumes of components. Chinese manufacturers will be reluctant to cater to trivial needs when they have several large-scale clients to handle. Another problem is reliability. You need to have a supplier whom you can be sure of, who will deliver the goods in time and with all quality intact.
You will also require a supplier who will be steadfast and will be a constant source. Though this may seem to you like a trivial factor, it is becoming a trend with more and more suppliers to drop small and medium-sized clients in the face of large orders from global giants. Like for example a Fortune-500 company. And aside from all this, there are a plethora of tedious regulations and restrictions that need to be complied with, in the import and export industry.
This is a veritable cornucopia of obstacles. There is no need to despair, though. Help is close at hand with a long list of sites providing Electronic Manufacturing Services or EMS. These companies will take all responsibility of importing components and designing your dream device upon themselves.
Most of these companies have understandings with Chinese suppliers to provide necessary components. With their capital and clout, they strike deals separately with a number of different suppliers, rather than rely on one person or company. Once the procurement stage is complete, they present you with a design as per your requirement and budget. If the rough draft is satisfactory, the actual process is begun.
From there, it is but a step to actually launching your product in the market. And you will find that the transition from a vague …
The Right Way to Keep Yourself Away From Germs
There are a number of unknown and known viruses in the air that keeps on spreading. A major channel through which viruses spread is your own hands. You need something like a hand sanitizer dispenser to make sure that the viruses do not spread and with you even other people around you do not get virus transfers and hence, fall ill.
Your hands touch so many things all though the day and end up picking germs constantly. Washing with soap and water works, but it is researched and known that neither it’s always convenient nor very effective. Interestingly, you end up picking even more germs when same soap is been used by a number of people. Hand sanitizer dispenser plays a great role in this case and saves you from a number of diseases.
The two broad categories in which hand sanitizer dispenser available are
1. Digital hand sanitizer dispenser: this is the advanced version of the manual one and has some interesting features attached. It runs on electricity therefore, you will have to find a place where there is a power outlet. Once you have provider Types Of Service Sector power to the sanitizer, all you need to do is to bring your palm under the nozzle, the sensor reads that automatically and releases an amount of sanitizer on your palm. You can adjust the speed and volume of sanitizer as per your convenience.
2. Manual hand sanitizer dispensers: they comprise of a very basic design and simple to look at. In terms of mechanics, you will have a tank (container) that will store the hand wash liquid and a nozzle. On pressing the nozzle, the sanitizer will drop, so you will have to place your palm at the bottom so that the drops would fall on your palm. Then you can simply rub your palms together and enjoy a germ-free time.
One limitation of this kind of hand sanitizer dispenser is that, you will not be able to control the flow of the sanitizer, which means that, on pressing, you will get a certain Service Industries Definition amount of sanitizer. If you need more of it, you will have to press it again and if you need a lesser amount then there is no option but to waste a part of the sanitizer.…
As a Business Owner, Are You Empowering Yourself?
As a business owner, there are so many demands on our time… staff, clients, marketing, office admin, accounting… the lists are endless. We’ve all read from numerous sources how fundamental it is to work on our business, instead of in our business. But the often missed topic and question is when do we work on ourselves?
As a business owner, I’m always trying to balance the needs of my team members – to ensure that they are motivated, engaged and excited about coming to work every day. But who does that for us? Who rejuvenates our energy, and ensures that we are staying at the top of our game? That responsibility also rests solely upon our shoulders. For those of you who know me, you’ll understand how difficult it is for me to take 2 days off in a row. And two days off in a row during tax season?? Unheard of! But that is just what I’ve done. Today was my first day of a 2 day conference I attended called Women in Leadership and Business. Thanks very much to Ildy Wilie, who organized the event, and filled the need for an event like this. The event was held in Niagara-on-the-lake at the White Oaks Conference Resort & Spa, which is a fabulous venue. But honestly, the conference could have been held in the back of an alley, but as long as the speakers were the same, it still would have been inspiring. The keynote speaker this morning, was Arlene Dickinson of Dragons’ Den. As her background is marketing, I was expecting to come away with some strategic marketing tips that could be employed in my business, but what I walked away with instead, was an awe-inspiring story of a woman’s struggles to make it on her own, and the humor she was able to find in what otherwise would be difficult life lessons. After Arlene was done speaking, I felt as though she had shared a very personal part of herself, and her journey, in order to help us all feel that we were not alone.
Arlene set the tone for the day, and it was one speaker after another that left me inspired. Although I didn’t arrive home until 7:30 pm, and had left the house this morning, 12 hours earlier, I felt more Industrial Revolution energized than I have in months. My husband and my daughter listened to me tell them about my day and all of the things I learned all through dinner, that I’m not sure anyone else got a word in edgewise
It certainly reminded me how important it is that as business owners, we don’t forget about ourselves. The businesses are our babies and our heart and soul gets poured into its activities, Industrial Technology Pdf day after day… but we need to remember to step away every so often, spend some time on ourselves, and you’ll be amazed at what a difference it will make when you return to the office.…