For developers of industrial grade solvents, creating the ideal solvent usually begins with targeting a particular type of customer, such as automakers, hospitals, or even the military. What typically results, though, is a solvent that can benefit a broad variety of customers, despite its range of application usually benefiting the customer target the most. Using military cleaning solvents as an example, there are at least five eco friendly military cleaning solvents that can benefit customers who need industrial grade cleaning power but want solutions that are environmentally preferred or environmentally safe. We list them and describe their qualities below.
Electron 296 Dielectric Solvent
Electron 296 is a dielectric orange degreaser intended for military vehicles, ground equipment and weapons systems cleaning. Formulated without chlorinated solvents and having no SARA, RCRA, OSHA PEL or ACGIH TLV listed ingredients, Electron 296 is non flammable, fully evaporative, contains no water, exhibits no surface leakage of current in immediate residue tests, and has a dielectric strength to test limits 46,000 volts. Electron 296 is qualified to meet MIL-PRF-680A, Type IV.
New II Degreasing Cleaner Learn About Tech Industry for Parts Washers
New II is an environmentally preferred parts cleaner intended for drum mounted and immersion tank solvent parts washers. Containing no hazardous ingredients according to the EPA yet still powerful enough to remove grease, fuel oil, carbon and organic resins, New II has a flashpoint of 145 degrees Fahrenheit, is fully evaporative, contains no water, and is safe on all metals and most plastics and rubbers. New II is qualified to meet MIL-PRF-680A, Type II.
Vortex Citrus Cleaner and Industrial Degreaser
Vortex is a 100 percent organic degreaser that contains no petroleum distillates, alkalis, or halogenated solvents and is intended for general degreasing. Fully biodegradable and containing no harmful fumes, Vortex can be sprayed, wiped or brushed onto surfaces, and is capable of removing heavy accumulations of tar, asphalt and bitumen.
Positron Ultra-High Purity Dielectric Solvent
Positron is a dielectric orange degreaser intended for maintenance, repair and overhaul. Non-toxic and low odor, Positron is a highly aggressive dielectric solvent that Indonesia Garment Manufacturers offers superior dry time and has a dielectric strength to test limits of 48,000 volts. With no SARA or RCRA listed ingredients, Positron is safe and easy to use.
Safe Strip Paint and Resin Remover
Safe Strip is an environmentally preferred solvent for removing paints and resins in general military applications. Fully biodegradable, non-flammable, and offering one-step coatings removal, Safe Strip is similar in performance to MEK and methyl chloride, Safe Strip can be collected after use and used over and over again. For faster stripping action, Safe Strip can be safely heated up to 140 degrees Fahrenheit.…
Tag: rated
Importance of Using Fire Rated Steel Windows in Commercial Construction
The building code of many municipalities will require fire rated steel windows in certain building situations. These special windows give an extra level of protection to the buildings occupants, adjacent buildings and fire fighters in the event of a fire.
Fire windows come in two different ratings. They are available with a 45 minute burn time as well as a one hour burn time. This gives firefighters additional fire fighting time to bring the building under control. It may also prevent fire from and adjacent building from burning your building and its contents.
Windows are a necessary part of any building. They allow light and ventilation inside the building. However, in the event of a fire, most normal windows may present a hazard to the buildings occupants, fire fighters and adjacent buildings. If the window breaks, it may cause a back draft and the fire can explode to an even larger proportion. The fresh oxygen can fan smoldering items to a full fledged fire that is dangerous to anyone in the building.
Building codes are written to protect people, including fire fighters. The architect designing the building has What Is Industrial Development Definition to follow those codes and contractors are responsible to install materials that follow the architects plan.
In times past, fire rated windows had an industrial look. They were often a steel frame with a single sheet of glass in the window. Today, those windows can have the look of the more decorative aluminum or vinyl windows or even of the classic wood windows.
Steel windows designed today will last the lifetime of a building. In order to prevent rust from forming on the steel, the steel window frames are protected with hot dip galvanizing. While galvanized steel would resist paint, it forms an excellent surface to apply baked on polyester power coating resin. The resin will last for many years and keep those windows looking just as good in the future as they do when they are first installed with no need to ever paint the windows. Most companies offer standard colors of brown or white and optional finishes that include brass, copper, bronze and nickel are also available.
Styles are also available that can match windows made of other materials by other manufacturers. You will find casement windows as well as sliders or even double hung windows to use in your building. Windows have been compared to the eyes of a building. How To Start A Small Business At Home They are needed for many different reasons. No one prefers working in buildings that do not allow outside light or ventilation. Being able to see outside can improve our disposition. Even so, windows may be a big hazard during a fire.
In order to lower the danger presented by a window in a fire, fire rated steel windows must be installed for certain applications. These windows can protect your properties as well as the properties next door. More importantly, however, they can protect human life, both …