When listening to fears and concerns about ERP solutions, implementation is usually on the top of most lists. Yes, it can be daunting, but it is the cornerstone of the overall project. So why do implementations fail? Below is our countdown of the most common ERP implementation errors and how to avoid them.
5) Don’t “Train the Trainer”
Proper implementation of an ERP solution takes a full-court press from your company. Many times companies simply underestimate what it takes to get it done. The “train the trainer” approach to cut costs can get you in trouble. Having only one or two key people learn the system, so they can train other employees is a recipe for disaster. All users should have an opportunity to work directly with the vendor’s implementation team. Meet with your vendor to get a clear understanding of what it takes to fully implement the system so you can reap the benefits throughout your organization.
Also, avoid the temptation to train your personnel by department; such as having customer service train from 8:00 to noon on Monday and then have purchasing take over after lunch. These sessions usually just devolve into a demo rather than interactive training. But worse, trainees have no sense of how the software integrates nor how they are affected by events upstream and how they impact those who are downstream.
4) Underestimating Implementation Days Needed
In order to keep costs down so they can close the deal, some vendors suggest you purchase fewer implementation days than you really need. This leaves you with buyer’s remorse when you learn you must spend more than you expected in order to fully exploit the software – not to mention the cost of a delayed or failed implementation. Vendors will never guarantee they can get the implementation done with the days they quote, but press them to be up front with what it really takes to get their system up and running throughout your shop. Ask for specific examples of other similar projects and their implementation durations – and insist on references.
3) Resistance to Change
Culture shock is possibly the most difficult hurdle in an ERP rollout. Employees are resistant to change for a myriad of reasons; usually rooted in some type of fear. They may be worried that their jobs are in jeopardy or that they will be unable to learn the new system. Some may just be afraid of computers. Whatever the reasons; education is the answer. Try to let them see how the new system will Manufacturing Engineer Salary California benefit them personally. They may be less stressed because all the information they need is readily available; they may be less exposed to failure because they have greater control and visibility or they may simply have time to organize a meaningful thought rather than just run from fire to fire. Once they see how their own lives will be easier, they will actually be excited about the new system.
2) Choosing the Wrong …
Things to Look Out For When Participating in the Cash For Clunkers Program
It shouldn’t come as shock to hear that the automotive industry really requires a jolt of energy in its current state to get the gears spinning again. With overall consumer spending down quite a bit the automotive industry that once thrived during economic times has recently seen and felt its fair share of turmoil. The newly rolled out government program, Cash for Clunkers, has been created by the Obama administration to not only stimulate the automotive industry with new sales and inquiries but also to remove some much less efficient older fuel burning vehicles.
For those who meet the criteria for this program they can acquire some really hefty discounts and rebates on the purchase of a new vehicle. Each vehicle owner will need to show one year’s proof of insurance, proof of registration going back one year and a clean title to even be considered for the government program. Make sure you have all of this taken care of before you go car shopping and spending time test driving new vehicles otherwise you will not qualify. The program has some very strict vehicle requirements as well so it is important to understand all the fine print before you decide to go car shopping. First off your vehicle must be manufactured twenty five years Why Is Manufacturing Important before the date of the trade in. Any older and a vehicle is ineligible for the program. Your current vehicle must also have a MPG rating of 18 MPG or less to the gallon in order to qualify for the cash for clunkers program. The car cannot be towed into a dealership. The car you drive must actually be drivable in order to drive off in a new vehicle. It is also OK to have a salvaged title as long as the vehicle is actually drivable. If you have a vehicle that has a Gross Vehicle Weight Rating (GVWR) of 8500lbs or over your vehicle will be classified as a category three truck and will require to be a 2001 model year or newer vehicle in order to qualify for the program.
There has much speculation regarding the Cash for Clunkers program since President Obama launched this effort. The reality is that it is one of many programs that are needed to really stimulate the economy. This one in particular has encouraged many to go out and purchase vehicles causing a healthy spike in automotive production, sales and an overall positive movement in the auto List Of Manufacturing Business. Any type of movement in the industry right now is encouraging for all dealership owners. This program has allowed many people the ability to save thousands of dollars buying new vehicles. New vehicles that would have never been purchased if this program did not exist are now being purchased hence stimulating sales in the automotive industry.…
All You Need to Know – Using Computers, Printers, Touch Screens, Monitors and LCDs in Harsh Areas
The use of computer equipment is now as wide spread in factories, warehouses and in the industrial sector as it is throughout our offices and homes. There is no wonder really when you consider how useful computer equipment is to monitor and control factory processes or stock levels.
There are challenges in using this type of technology in less than perfect surroundings though, as many industrial and factory settings contain many hostile and harsh elements that can permanently damage and disable this type of computer equipment.
Protecting this type of equipment in these areas can be extremely challenging as industrial areas vary on the types of harsh elements around. Some environments are Electrical Apprenticeship Program dusty and dirty with forklift trucks whizzing up and down the aisles; other areas may be spotlessly clean but water could be used liberally to wash areas down.
Industrial computer enclosures, printer enclosures and touch screen enclosures provide an ideal solution to countering these harsher elements. Most manufacturers of these enclosures produce them to international guidelines such as NEMA 4 or the European IP65/IP54. Not only can they protect against nearly everything modern Manufacturing Engineering Job Summary can throw at them – dust, dirt, water (including jet washing), extreme temperatures, vibrations and heavy impacts – but also they can house any standard off-the shelf piece of equipment.
This has major benefits as inexpensive devices can be used rather than specific industrial computers, industrial printers, industrial touch screens or displays. Even standard TVs can be used in industrial applications for digital signage by housing them in an industrial LCD enclosure.
LCD enclosures and touch screen enclosures are now regularly being used outside for the purposes of outdoor digital signage as they are secure and can withstand everything the weather can throw at them.…
Asbestos Compensation Claims Are an Insurance Industry Time Bomb
The use of asbestos was banned over thirty years ago, but the Insurance Industry now faces a time bomb of claims from people directly or indirectly exposed to the deadly substance.
Asbestos was once hailed as a miracle product but its use has exacted a terrible price for those exposed to it. Diseases caused by ingestion into the lungs such as Asbestosis and Mesothelioma may take over forty years to become apparent, and the true cost of the substance use in damages claims, is only just beginning to occur.
Asbestos has been used by man since ancient Greece for its fire resistant properties, but even then it was recorded that slaves exposed to it were dying from terrible lung disease and breathing difficulties.
In the twentieth century Asbestos was used in all sorts of construction and manufacturing processes. In every public building you would find pipes and boilers covered with the material. Shipbuilders and dockyards were particularly prevalent in its use and it was not uncommon to regularly see old ‘laggers’ and pipe workers coughing up the so called ‘Dockers oysters’. Offices were also exposed to asbestos with the use in partition walls and suspended ceilings. In the home it was used in all sorts of ways ranging from ironing boards to car brake pads and shed roof coverings.
By far the most deadly variety of asbestos is ‘blue asbestos’ of which a single strand in the lungs can cause the deadly disease years later.
The first asbestos related industrial injury claims appeared in the 1960’s and have risen dramatically since then. The use of the material in the UK was stopped by the H&SE (Health and Safety Executive) in the 1970’s but it was only finally banned in 1980. During Manufacturing Engineer Leading Companies that time many asbestos removal firms sprung up primarily to remove the substance from public buildings such as hospitals and schools. By 2003 it is estimated that the number of direct asbestosis claims accounted for a payout of over 1.3 billion pounds in the UK.
There are four recognised types of asbestosis related disease ranging from the savage lung cancer mesothelioma which usually kills within a year, through to what are known as ‘pleural plaques’ for which legislation in the UK does not currently allow claims, though this is set to change and could trigger billions of pounds worth of claims.
Pleural plaques are areas of scar tissue on Give Two Examples Of Heavy Industries the lungs caused by exposure to asbestos.
Although not directly covered for claims as the cause and outcomes cannot be proven, UK Insurance companies used to pay out small amounts to compensate for the anxiety of the possibility of the plaques developing into something more serious such as mesothelioma. In 2007 the House of Lords ruled that these conditions are no longer entitled to compensation, though this is currently being challenged by the Scottish Courts and others and is expected to be overturned.
The United States is about twenty years …
The Universe of Surface Treatments For Precision Industrial Tooling
The range of processes used to treat the surfaces of engineered materials is quite wide and the results vary on a number of different factors, including the process, the coating media and the substrate surface. If the universe of surface treatments were to be categorized according to two criteria – the first being that the metallurgy produced by the process is equivalent and the second being that the equipment used to implement the process is related – then all surface treatments can be classified into one of six categories:
Heat Treatments –
Heat treatments affect the entire volume of the substrate material and extend to the surface region. Heat treatments can be performed either in air or in a vacuum chamber.
Case Hardening Processes –
Case hardening processes produce a hardened case layer INSIDE of the surface of a substrate by thermally-driven diffusions of species, such as C, N, or B. The case hardening process can be implemented in a salt bath at atmospheric pressure, an elevated pressure chamber (gas nitriding, carburizing) or a vacuum chamber (ion nitriding, carburizing).
Chrome Plating, Conversion Coating & Anodizing Processes –
Chrome plating, conversion coating and anodizing processes are used to deposit coatings ON the substrate surface, rather than inside it. They are all chemical processes implemented in an aqueous media contained in a tank at atmospheric pressure. A wide variety of metallic and metallic oxide coatings can be deposited.
Plasma Spraying –
Plasma spraying is used to build thick coatings ON the substrate surface and there is always a distinct interface between the coating and the substrate. Plasma spraying can be done in air at atmospheric pressure or in a low-pressure chamber and is usually used to deposit thick metallic or oxide coatings.
Physical Vapor Deposition Resale Price Maintenance (PVD) Coatings –
Physical vapor deposition is used to deposit thin hardcoatings ON the substrate surface. A limited variety of metallic Types Of Industry nitride, carbide, oxide and diamond-like carbon coatings can be deposited. A vacuum environment is required.
Ion Beam Enhanced Deposition (IBED) Coatings-
Unlike all conventional treatments, IBED is a physical – as opposed to a chemical or thermal – process. The temperature rise during processing can be held below 200 degrees Fahrenheit so no thermally-induced volumetric changes in bulk properties or physical dimensions are produced. IBED processing combines the benefits of thermal diffusion processing and conventional coating technologies because the coating atoms first penetrate INTO the substrate to form a case layer in the surface, and then are grown out from this case layer as a thick coating. Driven in kinetically instead of thermally, IBED coatings are “ballistically bonded” to the substrate, thus forming a metallurgical bond that is much stronger than a mechanical or Van der Waals bond. And because the IBED process is kinetically driven, solid solubility limits can be exceeded which is the mechanism that allows deposition of a variety of types of coatings on virtually any substrate material.…
A Look at Scaffold Tower Training
Scaffold tower training is extremely important because it means people will be safer, both those building the tower and those that will be using it. Too often, people feel they can create or use a tower with no training at all, likely because they consider it a very basic structure which does not seem too complicated. In some respects this is may have an element Types Of Service Organizations of truth. However, even a small mistake can lead to a very serious situation where those who are using the tower could be injured or potentially killed. Forgetting to set up a full bar or to connect one side of the platform may seem like a small oversight, but could be sufficient for the whole structure of aluminum braces and bars to come tumbling to the ground.
For a business, safety when working with scaffolding has to be of paramount importance. From the “people” standpoint, the company should not want their workers to be injured in the name of work, or trying to work a little faster, but must take the health and well being of employees as one of its top priorities. From a business standpoint, it would be terrible to have an employee who is injured and then sue the company for not giving him or her a safe working environment. Consider also that it is not very cost effective to pay an employee while he or she is at home recovering from injuries sustained in the workplace.
Taking the time to implement, (& the budget to pay for) a simple safety program to adequately train your employees in the simple and basic procedures required for them to safely erect Safety Precautions In Workshop Practice scaffold towers, will not only give you peace of mind, but also the security of knowing that your employees will be safe and your company will have avoided a potential lawsuit.…